Need more 3.5mm connections?
Sept 3, 2018 7:03:29 GMT
via mobile
admin, thetechnobear, and 1 more like this
Post by peejayy on Sept 3, 2018 7:03:29 GMT
Thought this would be handy for people wanting more connectivity for eurorack. The ns1 nanobridge available from sound machines.
The nanobridge allows for 14 3.5mm Jacks to be connected to and from your AEM system. You will need +5V and ground for this, you can get this from the USB module or take it directly from the ribbon cable. Always use the protected side when sending signals to the AEM just to be on the safe side
I don't think the image worked so I'll just link you haha
www.sound-machines.it/product/ns1nanobridge/
The nanobridge allows for 14 3.5mm Jacks to be connected to and from your AEM system. You will need +5V and ground for this, you can get this from the USB module or take it directly from the ribbon cable. Always use the protected side when sending signals to the AEM just to be on the safe side
I don't think the image worked so I'll just link you haha
www.sound-machines.it/product/ns1nanobridge/
haha, I'm holding out for the xl case. In the meantime I think I'm going to try save some space by taking out the master module. Will be powering the AEM directly from the ribbon connector or USB module using the +5 and ground from my ns1. I have the bridge for my cv connections and the ns1 has built in midi to cv