|
|
Post by tIB on May 7, 2021 16:49:34 GMT
The matrix mixer is currently on sale at wonkystuff for those who will be headed that way later... would pair great with these.
|
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on May 7, 2021 17:04:46 GMT
The matrix mixer is currently on sale at wonkystuff for those who will be headed that way later... would pair great with these. Heh, yes - I probably should improve my marketing skills  Thanks tIB ! |
|
|
|
Post by rockysmalls on May 7, 2021 17:59:54 GMT
The matrix mixer is currently on sale at wonkystuff for those who will be headed that way later... would pair great with these. oh .. it does.... it certainly does! ;-) |
|
|
|
Post by lukylutte on May 7, 2021 18:12:12 GMT
Those are too hot again ✌️
|
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on May 7, 2021 19:20:44 GMT
Well, that was rather more stressful than I had anticipated — apologies for the website outage (I really didn't think that there would be *that* much demand!) — email was also lost for a few hours  Anyway, I hope that the website is now up and working again (technical side-point: it's now running through CloudFlare so there might be some wrinkles until the DNS changes propogate fully - if in doubt clear your local DNS caches). Now for a weekend of building and packing! Thank you all  |
|
|
|
Post by dizzeesatchel on May 10, 2021 18:01:57 GMT
Ok i was just skimming the assembly guide and I have the n00b-iest question of all time: in terms of soldering, the instructions basically just say "now solder the components" .... probably this will be obvious when i get my hands on the actual board, but does the spring connector also get soldered in place, as well as the AE headers? Or it just sits in there?
My other thought is that by virtue of the sprung connection/swappable panels, presumably enterprising folks could develop their own touchplate designs with unique touch characteristics? |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on May 10, 2021 21:46:26 GMT
Ok i was just skimming the assembly guide and I have the n00b-iest question of all time: in terms of soldering, the instructions basically just say "now solder the components" .... probably this will be obvious when i get my hands on the actual board, but does the spring connector also get soldered in place, as well as the AE headers? Or it just sits in there?
My other thought is that by virtue of the sprung connection/swappable panels, presumably enterprising folks could develop their own touchplate designs with unique touch characteristics? yep, the spring connector does get soldered in (ensuring that the springy bits point toward the panel!) — of course it’s completely possible to make new panels, as long as the pads and holes line up of course! |
|
|
|
Post by rockysmalls on May 20, 2021 11:46:49 GMT
|
|
|
|
Post by lukylutte on May 20, 2021 15:44:50 GMT
Thanks, mine just arrived to the post office. Will get it tomorrow.... finally 😁
|
|
|
|
Post by admin on May 27, 2021 23:04:49 GMT
|
|
|
|
Post by rockysmalls on May 28, 2021 10:13:03 GMT
that makes me very happy true fame at last!  and it’s in the wiki too.... |
|
|
|
Post by girault on May 30, 2021 11:23:03 GMT
Hi ! Would there be more ?  ))) Thanks ! |
|
|
|
Post by rockysmalls on May 30, 2021 12:05:27 GMT
Hi ! Would there be more ? ))) Thanks ! there is definitely a plan for another batch ... currently the spring connector is the part proving a problem ( nice alliteration! say it quickly ) |
|
|
|
Post by pt3r on May 30, 2021 12:11:33 GMT
Hi ! Would there be more ? ))) Thanks ! there is definitely a plan for another batch ... currently the spring connector is the part proving a problem ( nice alliteration! say it quickly ) Ooooh keep us posted, please. I missed the first batch  won't let this happen a second time. |
|
|
|
Post by girault on May 30, 2021 19:06:02 GMT
Hi ! Would there be more ? ))) Thanks ! there is definitely a plan for another batch ... currently the spring connector is the part proving a problem ( nice alliteration! say it quickly ) Thank you !!!! |
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on Jul 16, 2021 18:07:44 GMT
|
|
|
|
Post by pt3r on Aug 15, 2021 20:26:26 GMT
Built my black/gold edition today, it is truly a thing of beauty, in looks and design. Would recommend . |
|
Thanks 
)))
won't let this happen a second time.