|
|
Post by keurslagerkurt on Dec 21, 2023 8:40:20 GMT
Can't wait!  that looks great!! Def gonna try and print these. Will be for mid-january though, the 3D-printer I use is located at my workspace, so I won't be able to access it during holidays. (I'm getting my own 3D printer later in january as well though) Would love to check out the Fusion360 files as well, if you wouldn't mind sharing it? Or maybe in turn for a small price tag, that only seems fair  |
|
|
|
Post by georgemuralkh on Dec 23, 2023 16:09:53 GMT
|
|
|
|
Post by georgemuralkh on Dec 23, 2023 16:11:29 GMT
Can't wait! that looks great!! Def gonna try and print these. Will be for mid-january though, the 3D-printer I use is located at my workspace, so I won't be able to access it during holidays. (I'm getting my own 3D printer later in january as well though) Would love to check out the Fusion360 files as well, if you wouldn't mind sharing it? Or maybe in turn for a small price tag, that only seems fair Sorry but rn I don't feel comfortable to share source files. You can check all instructions and models on Printables. I wanted to publish also on thingiverse but I'm not a fan of their ux |
|
|
|
Post by georgemuralkh on Dec 23, 2023 16:12:28 GMT
I plan to add few more sized of cases like 10U 12U 14U and 2x rows cases. Also one case for uModules. but don't know when it will happen 😅
|
|
|
|
Post by keurslagerkurt on Dec 23, 2023 16:20:00 GMT
Can't wait! that looks great!! Def gonna try and print these. Will be for mid-january though, the 3D-printer I use is located at my workspace, so I won't be able to access it during holidays. (I'm getting my own 3D printer later in january as well though) Would love to check out the Fusion360 files as well, if you wouldn't mind sharing it? Or maybe in turn for a small price tag, that only seems fair Sorry but rn I don't feel comfortable to share source files. You can check all instructions and models on Printables. I wanted to publish also on thingiverse but I'm not a fan of their ux No problem at all, it's your work so you choose! 😊 Already very stoked that you gave us the result on printables, thanks! As said, i'll def print these after the holidays |
|
|
|
Post by georgemuralkh on Dec 23, 2023 16:34:19 GMT
Sorry but rn I don't feel comfortable to share source files. You can check all instructions and models on Printables. I wanted to publish also on thingiverse but I'm not a fan of their ux No problem at all, it's your work so you choose! 😊 Already very stoked that you gave us the result on printables, thanks! As said, i'll def print these after the holidays Cool thanks! Waiting for your try (hope all 3rd party modules will fit well 😊) |
|
|
|
Post by georgemuralkh on Jan 3, 2024 8:21:40 GMT
UPDATE: Added 2 rows cases of sizes 8-10-12-14-16U. Same for 1 row cases. Added handles for all sizes and connector XL for vertical positioning of a 2 row case. |
|
|
|
Post by georgemuralkh on Jan 3, 2024 12:00:34 GMT
Btw if you need other size - contact me and I will send you a file / or add it to printables.
|
|
|
|
Post by keurslagerkurt on Jan 10, 2024 15:50:09 GMT
First 8-row is printing in my Prusa MK3S+ right now! Its also the only option that fits its printbed. But thats perfect for me, I enjoy small cases Very curious how it will have worked out when I'm back tomorrow. First layers went fine already. |
|
|
|
Post by georgemuralkh on Jan 10, 2024 17:47:44 GMT
First 8-row is printing in my Prusa MK3S+ right now! Its also the only option that fits its printbed. But thats perfect for me, I enjoy small cases Very curious how it will have worked out when I'm back tomorrow. First layers went fine already. Cool! What settings you used and what filament? (And how long slicer saying it will take) |
|
|
|
Post by keurslagerkurt on Jan 10, 2024 17:52:24 GMT
PrusaSlicer 0.15mm Quality setting, with only adjustment to have 4 perimeters. 'Generic PLA' setting for filament, i'm using PolyTerra 'muted purple' PLA.
Scheduled to print for about 9 hours and a half. On 0.20mm setting it was 7 hours. But i'm leaving it on overnight, so i don't mind the longer times, which is why i put it on a lower layer height.
|
|
|
|
Post by georgemuralkh on Jan 15, 2024 17:00:41 GMT
PrusaSlicer 0.15mm Quality setting, with only adjustment to have 4 perimeters. 'Generic PLA' setting for filament, i'm using PolyTerra 'muted purple' PLA. Scheduled to print for about 9 hours and a half. On 0.20mm setting it was 7 hours. But i'm leaving it on overnight, so i don't mind the longer times, which is why i put it on a lower layer height. Have you tried new case? |
|
|
|
Post by keurslagerkurt on Jan 15, 2024 17:51:22 GMT
Yes, but only briefly. It came out nice! 😄 Only tested standard TW modules yet, they fit fine. This weekend i let another case and screws + handles print. Have not been back at work yet to test the dual combo + screws.. probably will only be able to fill the case with modules a bit later this week or next week, as i'm moving to a new house this month it's very busy 😅
But in short: so far so good! Will def post pictures when the rack is full later, and will also post them to Printables 😊
|
|
|
|
Post by georgemuralkh on Jan 15, 2024 20:11:04 GMT
Yes, but only briefly. It came out nice! 😄 Only tested standard TW modules yet, they fit fine. This weekend i let another case and screws + handles print. Have not been back at work yet to test the dual combo + screws.. probably will only be able to fill the case with modules a bit later this week or next week, as i'm moving to a new house this month it's very busy 😅 But in short: so far so good! Will def post pictures when the rack is full later, and will also post them to Printables 😊 Cool! Be cautious when laying down cable - it could be tricky especially if not laid from right to left. |
|
|
|
Post by keurslagerkurt on Jan 18, 2024 21:12:53 GMT
Quick test, quick picture. Fits together super nice!! 😄 Only will have to get some Hex header M5 screws next, i think maybe in 18mm and 16mm length. Now i use circular ones, which make the nice turning screws kinda useless 😅  All printed in PLA, basically standard settings on a prusa mk3s+. Only adjusted perimeters to 4, to get extra sturdiness. Will have to test later with all modules, and take some nice pictures to put on printables! Thanks for the awesome design, love the way it lifts both the bottom and top rack, feels nice and sturdy as well. 💖 |
|
|
|
Post by georgemuralkh on Jan 20, 2024 0:36:08 GMT
Quick test, quick picture. Fits together super nice!! 😄 Only will have to get some Hex header M5 screws next, i think maybe in 18mm and 16mm length. Now i use circular ones, which make the nice turning screws kinda useless 😅 View AttachmentAll printed in PLA, basically standard settings on a prusa mk3s+. Only adjusted perimeters to 4, to get extra sturdiness. Will have to test later with all modules, and take some nice pictures to put on printables! Thanks for the awesome design, love the way it lifts both the bottom and top rack, feels nice and sturdy as well. 💖 Wow looks super nice! Thank you for sharing photos! Need a photo with some Wonkystuff modules inside to be worry free 😊 |
|
|
|
Post by rodney on Mar 28, 2024 22:52:04 GMT
I LOVE this! The idea has really developed so far!
|
|
|
|
Post by rodney on Mar 28, 2024 23:02:15 GMT
I didn't think to use rosettes for hinge/joints etc. I will try that for my next such thing!
|
|
|
|
Post by keurslagerkurt on Aug 21, 2024 9:27:23 GMT
Wow looks super nice! Thank you for sharing photos! Need a photo with some Wonkystuff modules inside to be worry free 😊 Completely forgot to post a picture of the full racks! I actually took them with me to Superbooth Berlin as part of the setup to show off AE modular have not yet encountered any module that doesn't fit, so your design works perfect! So this is what I took to SB, left two cases are from your design! Right case is the quickswap case.  (people at superbooth really liked the cases as well!) |
|
|
|
Post by leethargo on Aug 21, 2024 11:32:50 GMT
Really like the colorful knobs!
Makes me think we need more color variation for panel design. wonkystuff provides a nice palette and I'm tempted to get some kaestle module for that wonderful yellow and red faceplate.
|
|
|
|
Post by funbun on Aug 21, 2024 12:58:11 GMT
Not sure how I missed this thread!
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Aug 22, 2024 19:18:19 GMT
Not sure how I missed this thread! Me too! |
|
that looks great!!
