beppe
New Member
Posts: 14
|
Post by beppe on Apr 23, 2020 8:18:41 GMT
Hi everybody! I'm a happy owner of an AE modular! I'm quite new in the synthesizers world so it isn't all clear for me. What I'm trying to do is to connect my walkman(made a tape loop) to the Master module. I can't get a sound.... I know it might be a silly question, but please help me!  Thanks in advance, Beppe |
|
|
|
Post by robertlanger on Apr 23, 2020 8:28:13 GMT
Hi, Welcome to the AE family!
Do it like this:
Connect the Walkman via a minijack cable with one of the Audio/I/O sockets on the MASTER module, then you can take it from the corresponding socket and patch it within AE wherever you want (Filter, delay...).
The minijack sockets operate as "adapter" from minijack to AE patchwires sockets.
Hope this helps!
|
|
beppe
New Member
Posts: 14
|
Post by beppe on Apr 23, 2020 8:56:46 GMT
Thank you Robert! But it doesn't seem to work... audioI/O is connected to an audio system and audio I/O got the walkman... trying to connect with something but still no audio  Unknown (144.63 KB) |
|
|
|
Post by admin on Apr 23, 2020 9:12:54 GMT
Hi beppe, please send a photo of your setup, use the "Add Attachment" button on the top right of the editor. |
|
beppe
New Member
Posts: 14
|
Post by beppe on Apr 23, 2020 9:15:46 GMT
Unknown (144.63 KB) This is it! thank you! ![]()
|
|
|
|
Post by admin on Apr 23, 2020 9:23:07 GMT
OK!
I assume you want to play the walkman and that sound should go through the filter or something and the walkman is connected to AUDIO2 on the Master module? Then you need to connect the AUDIO2 patch with the IN patch on a filter and the LP of the Filter back to AUDIO1 then connect AUDIO1 to an amplifier or audio interface.
Have you had a look at my very first introduction videos on how to setup audio?
Please watch these and also this one where I'm connecting a Volca Sample into the Audio input of the AE:
Hope this helps!
|
|
beppe
New Member
Posts: 14
|
Post by beppe on Apr 23, 2020 9:45:40 GMT
Oh yeeeeesss! thank you  I assume that is the same for other any instrument, right? I've start to watch your video...learning phase! so would you recommend something to read/watch? |
|
|
|
Post by admin on Apr 23, 2020 9:48:41 GMT
|
|
|
|
Post by Gaëtan on Apr 23, 2020 9:52:54 GMT
Remember also that the walkman outputs stereo, whereas the AE inputs are mono.
|
|
pol
Wiki Editors
Posts: 1,277
|
Post by pol on Apr 25, 2020 9:41:52 GMT
Hi everybody! I'm a happy owner of an AE modular! I'm quite new in the synthesizers world so it isn't all clear for me. What I'm trying to do is to connect my walkman(made a tape loop) to the Master module. I can't get a sound.... I know it might be a silly question, but please help me! Thanks in advance, Beppe No such thing as a silly question, even if the answer is obvious once you know! Don't forget to put soem of the ausio you produce doing this on the forum music page. :-) |
|
I assume that is the same for other any instrument, right?
