|
|
Post by sleeptotem on Jun 30, 2020 12:10:19 GMT
Hello everyone, new ae modular use here.
Got a midi question. Ive been using the midi channel 1 to send to the ae and its been working perfectly. My question is, the master module has this omni mode where you can select from channels 14, 15 or 16 but I dont know exactly how to use that functionality. The arrow points to a slot with some pins and im not sure what should connect to it or how it works.
Hope I explained myself, any help is gladly appreciated.
Cheers.
|
|
|
|
Post by admin on Jun 30, 2020 12:29:31 GMT
Hi sleeptotem, no worries, this looks a bit confusing but is really simple. You can switch to 5 different modes: 1. OMNI mode which means that the MIDI responds to ANY channel. You use the OMNI switch to select this mode 2. Channel 1 in which the module listens ONLY to MIDI channel 1. This is the default when OMNI is off and there is no bridge put into the channel pins. 3. Channel 14 in which the module listens ONLY to MIDI channel 14. To select this you need to cover the first two pins (from the left) with the little bridge that you should have received with the module. 4. Channel 15, same as above. You select this by covering the two right most pins with the little bridge. 5. Channel 16, same as above. You select this by covering all the pins with the two bridges that should have been part of the package. I hope this makes sense? |
|
|
|
Post by robertlanger on Jun 30, 2020 12:52:39 GMT
.. there is a small bag in the cardboard box with all the accessories, containing two of these jumper plugs.
|
|
|
|
Post by sleeptotem on Jun 30, 2020 13:32:27 GMT
I ordered the starter kit 2 and i dont think i got the pin? is it in a separate box to the cables because I only got a small box with cables and another with the plug adapters.
|
|
|
|
Post by korporation on Jun 30, 2020 18:00:06 GMT
I ordered the starter kit 2 and i dont think i got the pin? is it in a separate box to the cables because I only got a small box with cables and another with the plug adapters. They should have been in a bag with the patch wires. 2 little rectangle shaped connectors. |
|
|
|
Post by robertlanger on Jul 1, 2020 9:16:31 GMT
sleeptotem: If you cannot find them please let me know; maybe we have forgotten to include them in the accessories box - sorry for that. I will send them out right away if they are missing!
|
|
|
|
Post by sleeptotem on Jul 1, 2020 11:20:08 GMT
Hmm looks like it wasnt included, dont see it in any of the bags. Thats ok, if its easy to get I could buy it in a hardware shop, no need to mail such a small item, can you send me a picture or a reference as to how to find it? robertlanger |
|
|
|
Post by sleeptotem on Jul 3, 2020 12:04:35 GMT
robertlanger adminAppologies for the double tag but could you guys send me either a pic or a name/reference for the pin so that I can look around for it in my area?
|
|
|
|
Post by admin on Jul 3, 2020 12:09:31 GMT
|
|
morgs
Junior Member
Posts: 54
|
Post by morgs on Dec 5, 2020 12:04:21 GMT
Hello admin , could you post this as a photo? My internet provider is blocking the site regardless of what permissions I allow ;-| I received my starter rack in July 2019 but am only now venturing into the uncertain terrain of midi. I can confirm that I didn't receive any jumper cables in my original starter rack but it would be helpful to see what is needed and if I can just order from a local electronic component shop. Thanks! |
|
