|
|
Post by williamv on Jan 9, 2021 14:42:54 GMT
hello everyone i have noticed on some modules you patch points with nothing written next to it or a line to show you have more than one type of input or output can anyone tell me how i can find out what they are? thankyou all once again for your time
|
|
|
|
Post by robertlanger on Jan 9, 2021 14:49:04 GMT
On several modules, more than one output of a type is available; eg. two sawtooth outputs at the VCO. Also, there are multiples on many modules, they are marked as MULT and these are simply four sockets that are interconnected, without any internal connection to the module. You can use them for further splitting of signals. Hope this helps!
|
|
|
|
Post by moruial on Jan 10, 2021 11:28:43 GMT
The LFo don't have much indication comparing to other modules. but the first 3 are for the square wave, the second 3 are for the triangle/saw and the last 2 are for the pulse wave. And for the VCo, the last 2 outputs are nothing. if there is nothing written in front of them, it means they are connected to nothing.
|
|
|
|
Post by williamv on Jan 10, 2021 16:57:53 GMT
ok thankyou that is very helpful
|
|
