|
|
Post by onkelhoste on Jan 24, 2021 11:51:45 GMT
Largely self-explanatory ...
|
|
XODES
New Member
Posts: 39
|
Post by XODES on Jan 24, 2021 14:28:23 GMT
One should actually be able to access the +/- (or any other contacts you like) from the back! 
|
|
|
|
Post by onkelhoste on Jan 24, 2021 17:03:58 GMT
Do yourself a favor: don't use a pertinax board, but a board made from exoyd resin. The copper layers are stronger. I also soldered the connector from behind. Both ensure that
the connector does not tear off if too much force is applied to them. Here's my version 2:
|
|
