tgergo
Junior Member
Posts: 59
|
Post by tgergo on Feb 2, 2022 14:28:36 GMT
Hi, I'm not sure about the pitch modulation input of the example firmware synth voices. So far I tried dr1, Karplus Strong, and the vcdo. They don't seem to track correctly when I feed in the 1V/oct output of the TW quantizer. Am I doing something wrong? What is the recommended way to control the pitch of these voices?
|
|
namke
wonkystuff
electronics and sound, what's not to like?!
Posts: 686
|
Post by namke on Feb 2, 2022 18:07:39 GMT
Hi, I'm not sure about the pitch modulation input of the example firmware synth voices. So far I tried dr1, Karplus Strong, and the vcdo. They don't seem to track correctly when I feed in the 1V/oct output of the TW quantizer. Am I doing something wrong? What is the recommended way to control the pitch of these voices? There was no attempt to make the pitch track like another oscillator I’m afraid (tracking is irrelevant for the ‘desktop’ version) … however, it should be possible to get close in software (the latest version of the board-support library has something closer to a tracking oscillator). The option I use is to condition the pitch input cv through an attenuator/mixer since that allows a pitch offset to be added as well. I thought that I had made the VCDO a bit closer to ‘correct’ tracking, but it may be that I didn’t upload that version yet (knob A allows pitch offset to be set in this case) |
|
tgergo
Junior Member
Posts: 59
|
Post by tgergo on Feb 3, 2022 13:30:08 GMT
I successfully compiled the Bernoulli gates firmware. I think I'll start looking into programming the core.ae this weekend.  |
|
