|
|
Post by tIB on Apr 11, 2022 21:07:27 GMT
Hmmm, looks like my grains isn't outputting audio via the outs any more. I'm in G mode on the switch rather than M.
I get a low level output from the digital out (using the bytebeat firmware) but nothing at all from the analogue outs, which isn't as I remember it. I guess I'll load a new firmware and see if that helps things, but suspect the module has developed an issue... Anyone else have a similar issue and find a solution?
|
|
|
|
Post by pt3r on Apr 12, 2022 7:04:11 GMT
That is definitely not how it's supposed to behave, my grains module sends out via the 'analogue' outs using the bytebeat crossfade firmware.
|
|
|
|
Post by tIB on Apr 12, 2022 7:25:35 GMT
Yeah, that's as I remember it - pretty sure something has gone awry somewhere, though I'll see if I can load a firmware before going any further...
|
|
|
|
Post by tIB on Apr 12, 2022 8:55:22 GMT
Happy ending alert: seems to be back to normal after loading a new firmware, yay!
|
|
|
|
Post by MikMo on Apr 12, 2022 20:44:06 GMT
Happy ending alert: seems to be back to normal after loading a new firmware, yay! Good to hear you got it working. |
|
|
|
Post by pt3r on Apr 13, 2022 7:07:12 GMT
I can't help but wonder whether there is a bug in the used firmware that made the grains eventually crash.
|
|
|
|
Post by tIB on Apr 13, 2022 14:21:49 GMT
Yeah potentially, or something caused it to freak out. It's odd but the first issue I've had with it so who knows...
|
|
|
|
Post by pt3r on Apr 14, 2022 16:11:41 GMT
Yeah potentially, or something caused it to freak out. It's odd but the first issue I've had with it so who knows... And run the same firmware (more or less) and have not run into any crashes like you encountered. |
|
