|
|
Post by meshed09 on Sept 30, 2022 19:19:00 GMT
Hi everyone,
I need some advice please. Has anybody experienced bleed over from the channels in the mix console and is this standard or have I got a slightly broken mixer?
I don’t know if it’s because I’m going straight in to the mix console with 4 different sounds (drums on one, wavetables on another and two sequences on the other)? When all the channel volumes are turned down and the main channel volume is up halfway I can hear them bleeding through. Also if I have just the drums up I can hear the other 3 channels.
Is this common or is my mixer damaged?
I am also having a really bad noise on the outputs too. I’m using two mono 3.5mm jacks going to a stereo jack, going into a zoom h2n and listening on AKG closed back headphones.
Any advice or help will be most appreciated, I’m a noob with ae, I read the module manual first and tried to find YouTube videos but couldn’t find any info. Tia for any info or possible causes- Meshed09
|
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Oct 1, 2022 14:03:33 GMT
Hi everyone, I need some advice please. Has anybody experienced bleed over from the channels in the mix console and is this standard or have I got a slightly broken mixer? I don’t know if it’s because I’m going straight in to the mix console with 4 different sounds (drums on one, wavetables on another and two sequences on the other)? When all the channel volumes are turned down and the main channel volume is up halfway I can hear them bleeding through. Also if I have just the drums up I can hear the other 3 channels. Is this common or is my mixer damaged? I am also having a really bad noise on the outputs too. I’m using two mono 3.5mm jacks going to a stereo jack, going into a zoom h2n and listening on AKG closed back headphones. Any advice or help will be most appreciated, I’m a noob with ae, I read the module manual first and tried to find YouTube videos but couldn’t find any info. Tia for any info or possible causes- Meshed09 Hi, my Mixconsole certainly doesn't do this so suspect your is faulty; I would email TW direct and find out the next step
Pol.
|
|
|
|
Post by meshed09 on Oct 1, 2022 17:28:42 GMT
Hi, thank you for replying, I really appreciate it. I did think something wasn’t right when I was watching AE YouTube videos and all the sound seemed to be extremely good on them all.
Yes I’ll contact TW and see what my next step is. Thanks again.
|
|
|
|
Post by maydonpoliris on Oct 1, 2022 19:03:19 GMT
does the mixconsole still bleed if you don't patch the drum101 module into it
the reason i ask is that i had some bleeding in the 4attmix fader with the drm101 until i made the soldering fix to it. i'll find the fix thread if it relates
|
|
|
|
Post by meshed09 on Oct 1, 2022 22:25:11 GMT
does the mixconsole still bleed if you don't patch the drum101 module into it the reason i ask is that i had some bleeding in the 4attmix fader with the drm101 until i made the soldering fix to it. i'll find the fix thread if it relates Hi, thanks for that info re 010 drum, I pulled the input out and I could still hear some bleed over. What I didn’t realise before that there was this clicking sound in time with the envelope that was also bleeding over. I unplugged the envelope and went into a different one and the clicking has stopped. The bleed over seems to be loudest on channel 1, but this could be a pitch thing as it’s a much higher frequency than a couple of other inputs. I also turned the master volume up wondering if that would make a difference but sadly the bleed just got louder also. So, it seems to be a faulty envelope, and 1 channel bad. I will try a recording tomorrow and see how that goes. Thank you for the info re drum, at least I can rule that out. |
|
|
|
Post by maydonpoliris on Oct 1, 2022 22:40:58 GMT
does sound faulty if the bleeding continued and clicking stops when changing inputs.
try turning the attack up on the envelope to see if it gets rid of the clicking so you can use it in the meantime until it gets fixed
|
|
|
|
Post by meshed09 on Oct 2, 2022 14:38:27 GMT
does sound faulty if the bleeding continued and clicking stops when changing inputs. try turning the attack up on the envelope to see if it gets rid of the clicking so you can use it in the meantime until it gets fixed Hi, I think you’re right that there is something wrong with it. I will try turning the attack up and see what happens. Thanks again for all the suggestions, it helps a lot to have some different and more informed perspectives of what might be happening with these modules. I thought as a work around that maybe getting the mute switches module and cutting off other sounds before it reaches the noisy mixer inputs 🤔 |
|
|
|
Post by meshed09 on Oct 2, 2022 16:11:47 GMT
does sound faulty if the bleeding continued and clicking stops when changing inputs. try turning the attack up on the envelope to see if it gets rid of the clicking so you can use it in the meantime until it gets fixed Some good news I turned the envelope attack up just off of its zero position and the click stopped straight away, so that’s a relief. Thanks for the advice and solving my envelope problem. Still a bleed over from the mixer, but I can digest that more easily than thinking I have to replace/get repaired another module. 😅 |
|
|
|
Post by maydonpoliris on Oct 2, 2022 21:25:29 GMT
awesome, glad the envelope is good now
the 6mute could be a work around so you cut the effected sound until you need it to enter the arena. maybe get the mixer fixed and get a 6mute anyway, it is fun to play with.
|
|
|
|
Post by meshed09 on Oct 3, 2022 9:34:00 GMT
awesome, glad the envelope is good now the 6mute could be a work around so you cut the effected sound until you need it to enter the arena. maybe get the mixer fixed and get a 6mute anyway, it is fun to play with. Lol, yes, I agree, I’m thinking on maybe just getting a new mixer as the price to send this to be repaired then the cost of repair it’ll probably be about the same as buying a new one. I’m waiting on an order from TW at the moment, so once that is delivered I’ll put in an order for the 6mute 😉😀 |
|
glitchyfrog
Junior Member
it's time for human music
Posts: 97
|
Post by glitchyfrog on Oct 30, 2022 18:11:35 GMT
does the mixconsole still bleed if you don't patch the drum101 module into it the reason i ask is that i had some bleeding in the 4attmix fader with the drm101 until i made the soldering fix to it. i'll find the fix thread if it relates I have the same bleeding problems with the combination of high resonances inside the spring-reverb and the Kick-module patched into the mixer. Than I can hear the Springreverb through the mix-module (all parameters on 0). |
|
pol
Wiki Editors
Posts: 1,349
|
Post by pol on Nov 9, 2022 12:45:28 GMT
does the mixconsole still bleed if you don't patch the drum101 module into it the reason i ask is that i had some bleeding in the 4attmix fader with the drm101 until i made the soldering fix to it. i'll find the fix thread if it relates I have the same bleeding problems with the combination of high resonances inside the spring-reverb and the Kick-module patched into the mixer. Than I can hear the Springreverb through the mix-module (all parameters on 0). Beginning to think we need a noise gate module for the AE! It is possible your high resonance is just overloading the circuitry - just reducing that remove the bleeding problem? |
|
