rappel
Junior Member
Posts: 51
|
Post by rappel on May 19, 2023 21:05:57 GMT
First try with Volca Modular and my little rack.
I used AE attenuators for signals.
I have somehow triggered Kastle Drum with the Volca Sync, still not sure if
it was the best patch possible, but it was one of the best attempts to sync tempo...
I'd love to ear some thoughts, if anyone has the patience to go through my wiring scheme and infer something...
cheers!!
|
|
|
|
Post by admin on May 21, 2023 9:40:08 GMT
This is a great jam and it really got into the groove for me after the first minute. Very cool!
Just a word of caution about patching directly between the Volca Modular and AE … the VM has some voltage requirements which are not compatible with the AE. That’s why Robert has made the Volca-Bridge module for safely interfacing between AE and VM.
I’ve made a video about this a while ago which you may find useful:
|
|
|
|
Post by funbun on May 21, 2023 12:22:18 GMT
Volca Modular is a nice synth.
|
|
glitchyfrog
Junior Member
it's time for human music
Posts: 97
|
Post by glitchyfrog on May 22, 2023 19:05:43 GMT
First try with Volca Modular and my little rack. I used AE attenuators for signals. I have somehow triggered Kastle Drum with the Volca Sync, still not sure if it was the best patch possible, but it was one of the best attempts to sync tempo... I'd love to ear some thoughts, if anyone has the patience to go through my wiring scheme and infer something... cheers!! Yeah, Nice patch  The Volcas are using a different type of clock signal than usual. (think it's called S-Trigger) Maybe use another synth, who's capable in handling korg signals, idk maybe another volca, and sync over Midi and the Bus. Its a shame and a glory at the same time, that Volca did not include Midi into the modular... https://www.reddit.com/r/synthdiy/comments/lac79f/volca_beats_clocking_sequencer/"The volca clock from what I remember isn't perfectly square" "Also yeh I know it’s pulses are half time compared to other units but that’s fine "
Else stick with your ways, it seems to work maybe my blabla helped in some way and did not confuse Greetings Glitchyfrog |
|
|
|
Post by MikMo on May 23, 2023 7:00:27 GMT
If you scroll way down in this thread: modwiggler.com/forum/viewtopic.php?t=28086You will find a simple circuit to convert S-trig to V-trig. Be careful, there are many posts around with people being confused and posting the opposite converter. I'm not sure how the circuit would work in a 0-5V environment. ![]()  |
|
glitchyfrog
Junior Member
it's time for human music
Posts: 97
|
Post by glitchyfrog on May 24, 2023 7:06:30 GMT
If you scroll way down in this thread: modwiggler.com/forum/viewtopic.php?t=28086You will find a simple circuit to convert S-trig to V-trig. Be careful, there are many posts around with people being confused and posting the opposite converter. I'm not sure how the circuit would work in a 0-5V environment. ![]() View Attachmentve is not pushed. due to that you get little bit less voltage on Vtrig than on the Strig. Short awnser, as long as ve=5V, it works. (Thanks to my gf) |
|
