|
|
Post by tIB on Oct 20, 2023 13:24:25 GMT
Might need a spellcheck on that title, though the good news is the axoloti core is back in smaller format. Looking forward to grabbing one at Thonk some time soon - I'll be using it with the AE system one way or another... Interested to know whether I can fit it behind a panel... Info here: www.modwiggler.com/forum/viewtopic.php?f=17&t=277847&p=4048125#p4048125 |
|
|
|
Post by feijai on Oct 20, 2023 19:00:17 GMT
Might need a spellcheck on that title, though the good news is the axoloti core is back in smaller format. Looking forward to grabbing one at Thonk some time soon - I'll be using it with the AE system one way or another... Interested to know whether I can fit it behind a panel... Info here: www.modwiggler.com/forum/viewtopic.php?f=17&t=277847&p=4048125#p404812559mm * 90mm. Like Axoloti, no analog CV in, but one line in and out, balanced at zero of course. :-( Lots of GPIOs though. See also zrna.org/akso
|
|
|
|
Post by tIB on Oct 20, 2023 19:38:10 GMT
Might need a spellcheck on that title, though the good news is the axoloti core is back in smaller format. Looking forward to grabbing one at Thonk some time soon - I'll be using it with the AE system one way or another... Interested to know whether I can fit it behind a panel... Info here: www.modwiggler.com/forum/viewtopic.php?f=17&t=277847&p=4048125#p404812559mm * 90mm. Like Axoloti, no analog CV in, but one line in and out, balanced at zero of course. :-( Lots of GPIOs though. See also zrna.org/akso
The akso was a bit of a nightmare - I've better hopes for this one. I used to run my axoloti, loaded with MPE patches, into the AE system via 2 signal amp until it developed an issue - I'll be doing the same with this I imagine, powering it from the AE rack and using the pin outs into the system. |
|
|
|
Post by feijai on Oct 20, 2023 21:21:12 GMT
Well I was just imagining how to fit a Ksoloti in an AE Modular module. It'd require 3U I think. :-(
|
|
|
|
Post by tIB on Oct 20, 2023 21:41:42 GMT
Well I was just imagining how to fit a Ksoloti in an AE Modular module. It'd require 3U I think. :-( Just as easy for me to keep in the case with my setup - given the lack of midi/audio jacks on the main board it will go really slim... |
|
