Thorsten Meyer
New Member
FILM SCORE, SOUND, PICTURE AND MOTION
Posts: 19
|
Post by Thorsten Meyer on Sept 21, 2019 16:29:33 GMT
I got a K-2 from Behringer. The K-2 “speaks” Hz/V while my Eurorack speaks 1V/oct. To use the K-2 with Eurorack I used a Hz/V to 1V/oct converter the module Harvestment (English Tear).
AE Modular does not speak Hz/V either. Is there a way to connect AE Modular to Hz/V?
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on Sept 22, 2019 0:55:05 GMT
Interesting...Uli seems to have made this a bit _too much_ of a copy of the MS-20. The major stumbling block it (and the rest of Korg and Yamaha's analog synths with external control I/O) had was, in fact, that V/Hz issue and the negative triggering. I've used MS-20s for something like 30 years now, and that one interfacing point has always been an irritant. Not so much that I don't have _two_ MS-20 minis now, but still...would've figured he'd at least have tried to resolve that issue.
|
|
|
|
Post by evernoob on Nov 13, 2019 23:53:40 GMT
The Total and Freq Input of your k2 should be v/oct. You need to turn the corresponding poti, in the Frequency Modulation section, to max .
For trigger you need to build a little convertercable like in the video below its a very easy build.
|
|
yoreb
New Member
Posts: 26
|
Post by yoreb on Dec 8, 2019 20:02:03 GMT
For triggering, it could be that the inverted output of the 2att/cv is enough. Haven't tried it yet though
|
|
