|
|
Post by admin on May 27, 2020 6:18:37 GMT
|
|
Lugia
Wiki Editors
Ridiculously busy...ish.
Posts: 556 
|
Post by Lugia on May 27, 2020 23:25:52 GMT
One question...does this have CV constraint so that you can't go outside the 0-5V limits? It would seem that it might be an issue with phase reinforcement if you're mixing oscillating modulation signals.
|
|
|
|
Post by NightMachines on May 28, 2020 8:39:01 GMT
One question...does this have CV constraint so that you can't go outside the 0-5V limits? Yes, I don’t think any AE module let’s you exceed the system’s voltage range. |
|
paul23
New Member
only one module space left
Posts: 39
|
Post by paul23 on Aug 10, 2020 12:38:04 GMT
Interested in this one but I'm not sure if I understand it properly! Can you use this to mix audio levels using CV or have I misunderstood it?
|
|
|
|
Post by admin on Aug 11, 2020 2:04:51 GMT
Interested in this one but I'm not sure if I understand it properly! Can you use this to mix audio levels using CV or have I misunderstood it? I think this module is more for mixing CV signals, like mixing different rate LFOs for crazy variations. I'll play around with it this week and hope to get a video up on the weekend. |
|
paul23
New Member
only one module space left
Posts: 39
|
Post by paul23 on Aug 12, 2020 7:44:18 GMT
If you do get time that would be great, thanks.
Your videos, and those of TTNM, are what sold me on AE Modular by the way. Very good work.
|
|
|
|
Post by NightMachines on Aug 12, 2020 18:12:56 GMT
Thanks! You can use the module for audio mixing as well, but as Careck wrote, it really shines when mixing CV. It’s kind of a mandatory module for modular synth fun in medium to large systems in my opinion though, because as soon as you have it, you realize that your LFOs and other modulation sources were quite boring on their own ;-)
|
|
paul23
New Member
only one module space left
Posts: 39
|
Post by paul23 on Aug 13, 2020 6:37:00 GMT
Thanks! You can use the module for audio mixing as well, but as Careck wrote, it really shines when mixing CV. It’s kind of a mandatory module for modular synth fun in medium to large systems in my opinion though, because as soon as you have it, you realize that your LFOs and other modulation sources were quite boring on their own ;-)Sold! Having more interesting, and potentially chaotic modulation sources is something I am looking for. I am still interested in a mixer module that allows you to change audio signal volumes for each audio in/out. Does such a module exist yet? Will add it to the module suggestion thread if not. |
|
|
|
Post by NightMachines on Aug 13, 2020 7:24:52 GMT
I am still interested in a mixer module that allows you to change audio signal volumes for each audio in/out. Does such a module exist yet? Will add it to the module suggestion thread if not. Do you mean a voltage controlled audio mixer? If so, that’s just a VCA for each mixer channel. You simply patch your audio through a VCA and from there into the mixer. After the mixer you can add another VCA for the main volume. |
|
paul23
New Member
only one module space left
Posts: 39
|
Post by paul23 on Aug 15, 2020 8:55:57 GMT
I am still interested in a mixer module that allows you to change audio signal volumes for each audio in/out. Does such a module exist yet? Will add it to the module suggestion thread if not. Do you mean a voltage controlled audio mixer? If so, that’s just a VCA for each mixer channel. You simply patch your audio through a VCA and from there into the mixer. After the mixer you can add another VCA for the main volume. Ah, yes! I hadn't thought of that. Thanks! |
|
|
|
Post by NightMachines on Nov 15, 2020 12:01:03 GMT
Filmed a short demo video for the POLAMIX, which also applies to the 2CVTOOL:
Key takeaways:
- It inverts input signals around 2.5V
- The mix output is offset
- It's DC-coupled, so you can patch slow, or even static, CV into the mix to offset it
- Because it's clipping above 5V and below 0V you can use it as a simple waveshaper/clipper for audio too (this is safe)
|
|
